Narrow endless belts


Go to series
Purpose

Narrow endless belts are used for abrasive processing different types of materials on narrow–belt grinders and manual grinders.

Dimensions of narrow endless belts

width - from 220 mm;
length - from 6 to 500 mm.

fghfh
Example of symbolic notation of narrow endless belts

EB 75х457 KK10XW Р80 GOST 12439-79,
EB - endless belt;
75 - width (мм);
457 - length (мм);
KK10XW - series application;
Р80 - grits;
GOST 12439-79 - normative document, according to which tool is made.

Table of estimated conformity of grit of grainss
GOST 3647-80 (reference) FEPA P
100 P20
80 P24
63 P30
50 P36
40 P40
32 P50
25 P60
20   -
16 P80
12 P100
10 P120
8 P150
6 P180
5 P220
4 P320, P360
М63 P240, P280
М50 P320, P360
М40 P400, P500
М28 P600, P800
М20 P1000, P1200
М14 P1500
М10 P2000
М7 P2500
Types of joints abrasive belts
Types of joints abrasive belts for narrow-belts grinders and manual grinders
Соединительный шов N1

N1

Paper backing

Overlapped joint with skived grains.

Соединительный шов N2

N2

Paper backing

Overlapped joint with unskived grains.

Соединительный шов N3

N3

Cotton cloth, polyester, blended backing

Overlapped joint with skived grains.

Соединительный шов N4

N4

Cotton cloth, polyester, blended backing

Overlapped joint with unskived grains.

Соединительный шов N5

N5

Cotton cloth, polyester, blended backing

Overlapped joint with totally skived grains in joint area. Used for manual polishing machines.

Соединительный шов S1

S1

Cotton cloth, polyester, blended backing, paper backing

Butt-joint with skived grains. Joint with reinforced tape on backside.

Соединительный шов S2

S2

Cotton cloth, polyester, blended backing, paper backing

Butt-joint with unskived grains. Joint with reinforced tape on backside.

Соединительный шов S6

S6

Cotton cloth, polyester, blended backing, paper backing

Butt-joint with unskived grains. Wave cut. Joint with reinforced tape on backside.

Соединительный шов NS

NS

Cotton cloth, polyester, blended backing, paper backing

Overlapped joint with unskived grains, with reinforced tape on backside.

Types of coating grains
Close coating of grains
90-95% surface of the backing is coated with abrasive grains.


Open coating of grains
about 50% of the backing surface is coated with abrasive grains.

Recommendations about safety use
Recommendations about safety use of endless abrasive belts GOST R 52588-2011
Belts are to be stored in warm and dry conditions. The indoor temperature should be 18-22°С, relative humidity 45-65%.
Before usage please check if the belt has any damages (holes, breaks etc.). Unused polishing tape stored in its original packaging.
After taking the belt out of package please put onto the bracket support of 50 mm diameter. In case the bracket support is too thin it may cause the break or some other damage of the belt.
If the abrasive belts glued overlap - pay attention to the arrows printed on the back (non-working) side. Install endless tape in the machine is necessary so that direction of rotation coincides with direction of the arrow.
At installation belts use special means to prevent damage to the edges of abrasive belt.
During work its neccessary to follow protective measures:
wear eye protection wear gloves
wear a respirator not permitted for wet grinding (depends on coated abrasives features and used tools)
Recommendations about storage
Recommendations about storage of endless abrasive belts
Storage warranty period - 12 months from the production date.
Optimal room-temperature 18-22 °С.
Relative air humidity 45-65%
Do not store of endless abrasive belts on distance of 1 m from heaters, cold, damp walls, windows, doors, floor.
Forbidden to expose belts to direct exposure to sunlight.
Series of narrow endless belts

KK10XW Узколенточный шлифовальный станок

Coated abrasive series on a rigid cloth cotton backing with aluminium oxide as an abrasive. Universal series for metal and hardwood processing at moderate loads.

Features:
  • Backing cotton cloth (Х)
  • Grains aluminium oxide
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

CK10XW Узколенточный шлифовальный станок

Coated abrasive series on a rigid cloth cotton backing. Used as grains- silicon carbide black is optimized for titanium machining, stone, glass, plastics and rubber.

Features:
  • Backing cotton cloth (Х)
  • Grains black silicon carbide
Application:
  • titanium and alloys
  • glass, stone, ceramics
  • plastics, composites
  • rubber, polyurethanes
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

ZK10XW Узколенточный шлифовальный станок

Coated abrasive series on a rigid cloth cotton backing. Used as grains- zirconia alumina provides aggressive material removal is especially effective at processing non-ferrous metalls, alloy steels, including stainless steels.

Features:
  • Backing cotton cloth (Х)
  • Grains zirconia alumina
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KK10JW Узколенточный шлифовальный станок

Coated abrasive series on a flexible cloth cotton backing with aluminium oxide as an abrasive. Flexible cloth backing enables high-quality and delicate processing of profiled surfaces.

Features:
  • Backing cotton cloth (J)
  • Grains aluminium oxide
Application:
  • profiled surfaces
  • carbon steels
  • alloy steels
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KX10YW Узколенточный шлифовальный станок

Coated abrasive series on very stiff polyester backing with aluminium oxide as an abrasive. Through the use of polyester backing is possible to achieve high strength and minimal elongation of the tape when operating under heavy loads.

Features:
  • Backing polyester (Y)
  • Grains aluminium oxide
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

ZX10YW Узколенточный шлифовальный станок

Coated abrasive series on very stiff polyester backing. Used as grains- zirconia alumina provides aggressive material removal is especially effective at processing non-ferrous metals, alloy steels, including stainless steels. Through the use of polyester backing is possible to achieve high strength and minimal elongation of the tape when operating under heavy loads.

Features:
  • Backing polyester (Y)
  • Grains zirconia alumina
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

SX10RW Узколенточный шлифовальный станок

Coated abrasive series on very stiff polyester backing. Used as grains- ceramic aluminium oxide has the best performance of the cutting ability is especially useful at processing very hard materials. Through the use of polyester backing is possible to achieve high strength and minimal elongation of the tape when operating under heavy loads.

Features:
  • Backing polyester (R)
  • Grains ceramic aluminium oxide
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

RX10RW Узколенточный шлифовальный станок

Coated abrasives series with aluminium oxide compact - abrasive backing on grains of aluminium oxide, combined into pellets. It has long service of life due to the constant evenly update granules grainss in during operation of the tool, while maintaining a constant surface roughness.

Features:
  • Backing polyester (R)
  • Grains aluminium oxide compact
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

MX10RW Узколенточный шлифовальный станок

Coated abrasives series with silicon carbide compact - abrasive backing on grains of black silicon carbide, combined into pellets. It has long service of life due to the constant evenly update granules grainss in during operation of the tool, while maintaining a constant surface roughness.

Features:
  • Backing polyester (R)
  • Grains silicon carbide compact
Application:
  • titanium and alloys
  • alloy steels
  • carbon steels
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KD10XW Узколенточный шлифовальный станок

Coated abrasive series on very stiff blended cloth backing with aluminium oxide as an abrasive. Universal series for metal and hardwood processing.

Features:
  • Backing blended cloth (X)
  • Grains aluminium oxide
Application:
  • carbon steels
  • alloy steels
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KD11XW Узколенточный шлифовальный станок

Coated abrasive series on very stiff blended cloth backing with aluminium oxide as an abrasive. Open applying grains helps to reduce greasing tape products grinding and increase service life of product in processing of softwood.

Features:
  • Backing blended cloth (X)
  • Grains aluminium oxide
Application:
  • softwood
  • putty and plastered surfaces
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

CK16XW Узколенточный шлифовальный станок

Coated abrasive series on a rigid cloth cotton backing. Used as grains- silicon carbide black is optimized for titanium machining, stone, glass, plastics and rubber.

Features:
  • Backing cotton cloth (Х)
  • Grains black silicon carbide
Application:
  • titanium and alloys
  • glass, stone, ceramics
  • plastics, composites
  • rubber, polyurethanes
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000