Flap wheels with the hub


Go to series
Purpose

Flap wheels with the hub used for cleaning of curved surfaces from scale, rust, for grinding and polishing products made of metals, wood, plastic and other materials. The following are flap wheels, which bore hole is formed in the process of hardening of binder hub.

fghfh
Example of symbolic notation of flap wheels with the hub

Flap wheels with the hub GOST 22775-77,
150 - external diameter (mm);
20 - height (mm);
32 - inner diameter (mm);
KK10XW - series application;
М40 - grits;
GOST 22775-77 - normative document, according to which tool is made.

Table of estimated conformity of grit of grainss
GOST 3647-80 (reference) FEPA P
100 P20
80 P24
63 P30
50 P36
40 P40
32 P50
25 P60
20   -
16 P80
12 P100
10 P120
8 P150
6 P180
5 P220
4 P320, P360
М63 P240, P280
М50 P320, P360
М40 P400, P500
М28 P600, P800
М20 P1000, P1200
М14 P1500
М10 P2000
М7 P2500
Types of flap wheels with the hub
Schematic image Dimensions
(D x h x d)
Limit rotation frequency (rpm)
Flap wheels with the hub
Схематичное изображения круга со ступицей
60x20x12
60x20x10
60x30x8
12800
80x30x8 9600
100x50(60,70)x12
100x30(50)x25
6700
120x20(80)x25
120x30(50)x32
5600
150x30(50)x12
150x50(30)x32
4500
200x25x54
200x50x50
200x50x100
200x50(30)x32
3400
Flap wheels with hub
with a recessed for the nut
Схематичное изображения круга со ступицей с выточкой под гайку
60x30x8 12800
80x40x8 9600
120x30(50)x32 5600
150x30(50)x32
150x50x12,8
4500
Flap wheels with hub
with reinforced ends
Схематичное изображения круга со ступицей с усиленными торцами
60x30x8 12800
90x30x12 7400
120x30x12 5600
Flap wheels with hub
and thread
Схематичное изображения круга со ступицей с резьбой
125x20xМ14 12300
Recommendations about safety use
Recommendations about safety use of flap wheels according GOST 52588-2011
Flap wheels are to be used only on the specially designed equipment.
Before starting work you are to check equipment and be sure that wheels were not broken during transportation or because of careless storage.
Spindle rotation frequency must not exceed number of rotations per minute (min-1), indicated on the wheel.
During work wheel rotation direction must coincide with arrow on the label.
To fix the wheel on machine spindle without slant, to screw it up with specially designed clamp. To be sure that wheel is properly fixed with snap ring of the required dimension (if necessary).
To switch the machine on and check wheel rotation at idle speed. There should be no hopping or axis displacement when the wheel rotates. The sanding starts when the wheel is at the max. number of rotations per minute.
While working avoid sudden loadings, especially when you start processing sharp edge.
Effective sanding by wheels is made during optimal load on them in accordance with required modes of exploitations of the used equipment.
Use the air suction device in the sanding area.
During work its necessary to follow protective measures:
wear eye protection wear gloves
wear a respirator not permitted for wet grinding (depends on coated abrasives features and used tools)
wear hearing protection
Recommendations about storage
Recommendations about storage of flap wheels
Storage warranty period – 12 months from the production date.
Storage temperature not below +2 °С.
Not used wheels to keep in mill package.
Series of flap wheels with the hub

KK19XW Прямошлифовальная машинка Стационарный шлифовальный станок

Universal series in low cost segment with use of cotton cloth as backing and aluminium oxide as abrasive suits for processing of different types of materials and surfaces. Optimal correlation of price/quality.

Features:
  • Backing cotton cloth (Х)
  • Grains aluminium oxide
Application:
  • carbon steel
  • non-ferrous metals
  • hardwood
Available grits GOST 3647-80 (reference):
100 80 63 50 40 32 25 20 16 12 10 8 6 5 4 M63 M50 M40 M28 M20 M14 M10 M7

KK10XW Прямошлифовальная машинка Стационарный шлифовальный станок

Professional series for processing of different types of materials and surfaces. High quality aluminium oxide and specially prepared cotton backing allow extend working useful life of tool.

Features:
  • Backing cotton cloth (Х)
  • Grains aluminium oxide
Application:
  • alloy steel
  • carbon steel
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KD20XW Прямошлифовальная машинка Стационарный шлифовальный станок

Professional series for processing of different types of materials and surfaces. Blended backing, consisting from polyester and cotton threads, provides high wheel durability. As abrasives high quality aluminium oxide is used.

Features:
  • Backing blended cloth (Х)
  • Grains aluminium oxide
Application:
  • alloy steel
  • carbon steel
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KK10JW Прямошлифовальная машинка Стационарный шлифовальный станок

Professional series for processing of different types of materials and surfaces. Flexible backing provides soft wheel work on final operations. As abrasives high quality aluminium oxide is used.

Features:
  • Backing cotton cloth (J)
  • Grains aluminium oxide
Application:
  • profile surfaces
  • alloy steel
  • carbon steel
  • non-ferrous metals
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000