Self-sticking sheets


Go to series
Purpose

Self-sticking sheets are used for coarse and fine processing of products from wood, metal, plastic and other materials without lubricating fluid.

fghfh
Example of symbolic notation of self-sticking sheets

Self-sticking sheet 93х230 KP14D Р80 ТU 3980-007-00223332-2004,
93 - width (mm);
230 - length (mm);
KP14D - series application;
Р80 - grits;
ТU 3980-007-00223332-2004 - normative document, according which tool is produced.

Table of estimated conformity of grit of grainss
GOST 3647-80 (reference) FEPA P
100 P20
80 P24
63 P30
50 P36
40 P40
32 P50
25 P60
20   -
16 P80
12 P100
10 P120
8 P150
6 P180
5 P220
4 P320, P360
М63 P240, P280
М50 P320, P360
М40 P400, P500
М28 P600, P800
М20 P1000, P1200
М14 P1500
М10 P2000
М7 P2500
Dimensions of self-sticking sheets
Placing of holes Dimensions
Схематичное изображение листа самозакрепляющегося 178x93 mm
186х93 mm
230x93 mm
230х115 mm
280x115 mm
400х80 mm
Схематичное изображение листа самозакрепляющегося 186x93 mm 230x93 mm
8 holes for dust removing Ø10mm
Схематичное изображение листа самозакрепляющегося 230x93 mm
8 holes for dust removing Ø10mm
Схематичное изображение листа самозакрепляющегося 230x115 mm 280x115 mm
10 holes for dust removing Ø10mm
Схематичное изображение листа самозакрепляющегося 230x115 mm 280x115 mm
14 holes for dust removing Ø10mm
Types of coating grains
Close coating of grains
90-95% surface of the backing is coated with abrasive grains.


Open coating of grains
about 50% of the backing surface is coated with abrasive grains.

Recommendations about safety use
Recommendations about safety use of self-sticking tools
During work with self-gripping tools it is necessary to use properly functioning electric and pneumatic tools.
Maximum disc working speed must not exceed 45 m/s.
During work with self-gripping tools exhaust ventilation must be foreseen.
To fix self-gripping tools from coated abrasives to the pressing tool head pieces closely, not allowing displacements, tools ledge out of head piece.
Before start of work it is obligatory to execute conditions for safety guarantee: to evaluate head piece working cover wearing, after self-gripping tool fixing on head piece its necessary to make displacement against its movement, to check fixture stability of the tool to the head piece at idle speed.
During work its necessary to follow protective measures:
wear eye protection wear gloves
wear a respirator not permitted for wet grinding
Recommendations about storage
Recommendations about storage of self-sticking tools
For air access pallet backing must be higher than floor level not less than for 0.2 mm.
Dry room is the room with humidity of no more than 60%.
to keep self-gripping tools in consumer package on shelf or pallets in dry, ventilated, protected from moisture and rainfall warehouses.
Серии листов шлифовальных самозакрепляющихся

KP14C Виброшлифмашинка

Open coat of grainss and anti-clog coating provide max. firmness to disc blinding by sanding products, that promotes to the productivity increasing during workpiece processing from soft, resinous wood, and also primed and lacquered surfaces.

Features:
  • Backing paper (C)
  • Grains aluminium oxide
Application:
  • softwood
  • hardwood
  • primed and lacquered surfaces
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KP10C Виброшлифмашинка

Coated abrasives series for processing of hardwoods.

Features:
  • Backing paper (C)
  • Grains aluminium oxide
Application:
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KP10E Виброшлифмашинка

Coated abrasives series for processing of hardwoods and metal surfaces.

Features:
  • Backing paper (Е)
  • Grains aluminium oxide
Application:
  • hardwood
  • сarbon steel
  • alloy steel
  • non-ferrous metals
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KP11E Виброшлифмашинка

Open coat of grainss on solid paper backing allows delete sanding products more effectively, that promotes increasing of life time during processing of workpieces from soft, resinous wood.

Features:
  • Backing paper (E)
  • Grains aluminium oxide
Application:
  • softwood
  • primed and lacquered surfaces
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KP14D Виброшлифмашинка

Open coat of grainss and anti-clog coating provide max. firmness to disc blinding by sanding products, that promotes to the productivity increasing during workpiece processing from soft, resinous wood, and also primed and lacquered surfaces.

Features:
  • Backing paper (D)
  • Grains aluminium oxide
Application:
  • softwood
  • hardwood
  • primed and lacquered surfaces
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000

KP10D Виброшлифмашинка

Coated abrasives series for processing of hardwoods.

Features:
  • Backing paper (D)
  • Grains aluminium oxide
Application:
  • hardwood
Available grits FEPA P:
20 24 30 36 40 50 60 80 100 120 150 180 220 240 280 320 360 400 500 600 800 1000 1200 1500 2000